Electrical Conduits

3D printing conduit fitting

supikLeave a comment

1st attempts to print the fittings for our 21mm corrugated conduit and air lines. The fitting has been designed for the RV-10 ribs. Material used: Taulmann Alloy910 (nylon)

Many thanks to Adrian (http://tasrv10.com/?cat=17) for the research, design & sharing his files and adjusting the inner diameter to accept our 21mm conduit!

Big thank you to my friend Ivan for taking the time and adjustments needed to print out the parts! Next printouts will be done with different temp & speed adjustments for best results..It looks like every printer needs a slightly different setup. (I am new to this technology)

Corrugated Conduit

supik1 Comment

2016-11-09 (edited 2016-12-15: added XPCLT-12BB)

Purchased 12m of corrugated conduit for wings and fuselage installations.

code d1 d2
XPCLT-17BB 16.6mm 21.00mm
XPCLT-12BB 11.8mm 15.6mm

XPCL Multilayer conduit

Material + Characteristics
• Outer layer: Specially formulated polyamide 6
  Intermediate layer: Specially bonding compound
  Inner layer: Specially modified polyethylene
• Very good ductility and good reversed bending charact.
• Good mechanical characteristics even under extreme conditions,
  such as low temperatures and low humidity
• Self-extinguishing
• Free from halogens, REACH + ROHS compliant
• Temperature range: –50 °C to +105 °C, short-term to +160 °C

Allows easy cable insertion due to low friction inner layer

DataSheet: ♦ xpcl-conduit-datasheet